A compressor is a mechanical device that increases the pressure of a gas by reducing its volume. Compressors are similar to pumps in that both increase the pressure on a fluid and both can transport the fluid through a pipe. As gases are compressible, the compressor also reduces the volume of a gas.
Compressors used in refrigeration systems are often described as being either hermetic, open, or semi-hermetic, to describe how the compressor and motor drive are situated in relation to the gas or vapor being compressed. The industry name for a hermetic is hermetically sealed compressor, while a semi-hermetic is commonly called a semi-hermetic compressor.
In hermetic and most semi-hermetic compressors, the compressor and motor driving the compressor are integrated and operate within the pressurized gas envelope of the system. The motor is designed to operate in and be cooled by, the refrigerant gas being compressed.
The difference between the hermetic and semi-hermetic, is that the hermetic uses a one-piece welded steel casing that cannot be opened for repair; if the hermetic fails it is simply replaced with an entire new unit. A semi-hermetic uses a large cast metal shell with gasketed covers with screws that can be opened to replace motor and compressor components.
A relay is an electrically operated switch. It consists of a set of input terminals for a single or multiple control signals and a set of operating contact terminals. The switch may have any number of contacts in multiple contact forms, such as to make contacts, break contacts or combinations thereof. Relays are used where it is necessary to control a circuit by an independent low-power signal or where several circuits must be controlled by one signal.
Specifications- Height: 1.85 in.
- Width: 2.15 in.
- Length: 2.1 in.
